Our single color Bluetooth & RF Controller allows dual control from a bluetooth app or a back up handheld remote. Controller also includes brake override option which will turn the kit on and to turn on if it is wired to your positive signal wire that can be used to turn the kit white with a dome switch or courtesy light.
2 PIN DUAL ZONE HIGH OUTPUT 30AMP CONTROLELR
APP "LEDSHOW"
Allows 2separate zones to be independently controlled or linked multiple zones for simultaneous control from the bluetooth app or a back up handheld remote. This high output controller can run up to 40 of our 12w rock lights. We recommend level loading the zones as much as possible. For example if your running 24 lights spread them out over all 4 zones. We don't recommend more than 10-12 of the 12w on a single zone.
SPECS:
-25YR WARRANTY (INCLUDES ACCIDENTAL)
-BRIGHTER AND WIDER PATTERN THAN MOST COMPETITORS
-PLUG AND PLAY WIRING HARNESS
-IP68 WATERPROOF
-FULLY MODULAR ADD ON LIGHTS AT ANY TIME EASILY
(Single Color) Bluetooth Controller w/ RF Remote - 2 PIN
Requires phone to use BT control via app. Also includes extra RF remote, remote does not require line of sight it is paired with the controller.
BLUETOOTH APP CONNECTION:
- Download app in the app store.
- DO NOT connect to the device in your phone settings menu
- Once connected you can adjust/create colors and patterns as well as turn on and off, the controller should retain the last used setting when powered off then back on.
RF HANDHELD REMOTE PAIR OR LOCK REMOTE: To pair the remote if connection lost or lock it so other remotes cannot control.
- Hold power button.
- Remove fuse from controller for 5 seconds, place back in.
- Continue to hold green power button for 3 seconds
COURTESY WHITE OVER RIDE: Connect white wire to switch or cortesy lights, this will turn on white even if the lights are turned off and will override any current color if already on.
*Additional instuctions can be downloaded*
